LOCTITE CORP -- LOCTITE(R) FAST CURE EPOXY 45, HARDENER COMPONENT  -- 8040-01-046-5061
<pre>=====================  Product Identification  =====================

Product ID:LOCTITE(R) FAST CURE EPOXY 45, HARDENER COMPONENT
MSDS Date:12/28/1988
FSC:8040
NIIN:01-046-5061
Kit Part:Y
=== Responsible Party ===
Company Name:LOCTITE CORP
Address:4450 CRANWOOD COURT
City:CLEVELAND
State:OH
ZIP:44128
Country:US
Info Phone Num:216-663-3011
Emergency Phone Num:800-424-9300 (CHEMTREC)
CAGE:7K128
=== Contractor Identification ===
Company Name:BALKAMP INC
Address:2601 S HOLT ROAD
Box:City:INDIANAPOLIS
State:IN
ZIP:46241
Country:US
Phone:317-244-7241
CAGE:70842
Company Name:LOCTITE CORP
Address:705 N MT RD
City:NEWINGTON
State:CT
ZIP:06111
Country:US
Phone:312-689-6200
CAGE:7K128
Company Name:LOCTITE CORP AUTOMOTIVE AND CONSUMER GROUP
Address:4450 CRANWOOD COURT
Box:City:CLEVELAND
State:OH
ZIP:44128-4004
Country:US
Phone:216-663-3011
CAGE:08028
Company Name:NAPA, A DIVISION OF LINCOLN AUTOMOTIVE
Address:ONE LINCOLN WAY
Box:City:ST. LOUIS
State:MO
ZIP:63120-1578
Country:US
Phone:414-255-5520
CAGE:050Q3

=============  Composition/Information on Ingredients  =============

Ingred Name:POLYMERCAPTAN RESIN
Fraction by Wt: 30-35%
Other REC Limits:NONE RECOMMENDED

Ingred Name:ALPHA-ALUMINA (ALUMINUM OXIDE) (SARA 313)
CAS:1344-28-1
RTECS #:BD1200000
Fraction by Wt: 45-50%
Other REC Limits:NONE RECOMMENDED
OSHA PEL:15 MG/M3 TDUST
ACGIH TLV:10 MG/M3 TDUST; 9596

Ingred Name:SUBSTITUTED AMINOPHENOL
Fraction by Wt: 5-10%
Other REC Limits:NONE RECOMMENDED

Ingred Name:AROMATIC PLASTICIZER
Fraction by Wt: 5-10%
Other REC Limits:NONE RECOMMENDED

Ingred Name:STYRENE MONOMER (SARA 313)
CAS:100-42-5
RTECS #:WL3675000
Fraction by Wt: < 5%
Other REC Limits:NONE RECOMMENDED
OSHA PEL:100 PPM
ACGIH TLV:S,50PPM/100STEL;9596
EPA Rpt Qty:1000 LBS
DOT Rpt Qty:1000 LBS

Ingred Name:SILICA GEL
CAS:112945-52-5
RTECS #:VV7310000
Fraction by Wt: 1-3%
Other REC Limits:NONE RECOMMENDED
OSHA PEL:6 MG/M3
ACGIH TLV:10 MG/M3

Ingred Name:ETHYLENE GLYCOL (SARA 313) (CERCLA)
CAS:107-21-1
RTECS #:KW2975000
Fraction by Wt: 1-3%
Other REC Limits:NONE RECOMMENDED
ACGIH TLV:C STEL39PPM,A4,VAP96
EPA Rpt Qty:1 LB
DOT Rpt Qty:1 LB

=====================  Hazards Identification  =====================

LD50 LC50 Mixture:LD50 > 5000 MG/KG
Routes of Entry: Inhalation:YES  Skin:YES  Ingestion:YES
Reports of Carcinogenicity:NTP:NO    IARC:NO	OSHA:NO
Health Hazards Acute and Chronic:MAY CAUSE EYE IRRITATION AND OTHER
    ALLERGIC RESPONSES SUCH AS SKIN SENSITIZATION OR DERMATITIS.
Explanation of Carcinogenicity:THIS COMPOUND CONTAINS NO INGREDIENTS AT
    CONCENTRATIONS OF 0.1% OR GREATER THAT ARE CARCINOGENS OR SUSPECT
    CARCINOGENS.
Effects of Overexposure:EYE IRRITATION, SKIN SENSITIZATION, DERMATITIS.
Medical Cond Aggravated by Exposure:NONE SPECIFIED BY MANUFACTURER.

=======================  First Aid Measures  =======================

First Aid:EYES: FLUSH WITH WATER FOR 15 MINUTES WHILE HOLDING EYELIDS
    OPEN. GET MEDICAL ATTENTION. SKIN: REMOVE CONTAMINATED CLOTHING.
    WASH WITH SOAP AND WATER. IF IRRITATION PERSIST, GET MEDICAL
    ATTENTION. INH ALATION: REMOVE TO FRESH AIR. RESTORE BREATHING. GET
    MEDICAL ATTENTION. INGESTION: DO NOT INDUCE VOMITING. CALL
    PHYSICIAN.

=====================  Fire Fighting Measures  =====================

Flash Point Method:TCC
Flash Point:>200F,>93C
Lower Limits:NOT GIVEN
Upper Limits:NOT GIVEN
Extinguishing Media:CARBON DIOXIDE, FOAM, DRY CHEMICAL
Fire Fighting Procedures:NONFLAMMABLE. USE STANDARD FIREFIGHTING
    PROCEDURES FOR SURROUNDING MATERIALS IN THE FIRE.
Unusual Fire/Explosion Hazard:NONE SPECIFIED BY MANUFACTURER.

==================  Accidental Release Measures  ==================

Spill Release Procedures:SOAK UP WITH AN INERT ABSORBENT.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

======================	Handling and Storage  ======================

Handling and Storage Precautions:STORE BELOW 110F TO PRESERVE SHELF
    LIFE. KEEP AWAY FROM EYES. AVOID PROLONGED SKIN CONTACT.
Other Precautions:NONE SPECIFIED BY MANUFACTURER.

=============  Exposure Controls/Personal Protection  =============

Respiratory Protection:NONE REQUIRED UNDER NORMAL CONDITIONS
Ventilation:LOCAL EXHAUST AND MECHANICAL (GENERAL) VENTILATION AS
    REQUIRED TO MAINTAIN EXPOSURE LEVELS.
Protective Gloves:RUBBER OR PLASTIC RECOMMENDED
Eye Protection:SAFETY GLASSES
Other Protective Equipment:AN EMERGENCY EYEWASH AND SHOWER SHOULD BE
    AVAILABLE.
Work Hygienic Practices:WASH HANDS THOROUGHLY WITH SOAP AND WATER
    BEFORE EATING, DRINKING, SMOKING OR USING TOILET FACILITIES.
Supplemental Safety and Health
NONE SPECIFIED BY MANUFACTURER.

==================  Physical/Chemical Properties  ==================

HCC:V7
Boiling Pt:B.P. Text:>300F,>149C
Melt/Freeze Pt:M.P/F.P Text:NOT GIVEN
Vapor Pres:< 5
Vapor Density:NOT GIVEN
Spec Gravity:NOT GIVEN
Evaporation Rate &amp; Reference:NOT GIVEN
Solubility in Water:SLIGHT
Appearance and Odor:WHITE AND BLACK PASTE, SULFUR ODOR

=================  Stability and Reactivity Data  =================

Stability Indicator/Materials to Avoid:YES
NONE SPECIFIED BY MANUFACTURER.
Stability Condition to Avoid:NONE SPECIFIED BY MANUFACTURER.
Hazardous Decomposition Products:NONE SPECIFIED BY MANUFACTURER.

====================  Disposal Considerations  ====================

Waste Disposal Methods:LANDFILL OR INCINERATE FOLLOWING EPA AND LOCAL
    REGULATIONS.

 Disclaimer (provided with this information by the compiling agencies):
 This information is formulated for use by elements of the Department
 of Defense.  The United States of America in no manner whatsoever,
 expressly or implied, warrants this information to be accurate and
 disclaims all liability for its use.  Any person utilizing this
 document should seek competent professional advice to verify and
 assume responsibility for the suitability of this information to their
 particular situation.